Welcome to

Manufacturer of the KEM-O-PRO ®
Line of Automotive, Marine and Industrial Care Products

Our products are used on MILLIONS of autos worldwide, everyday!

TYPICAL PROPERTIES*
WAX-102
UV CUT Spray Carnauba Car Wax
TEST ASTM** TYPICAL PROPERTIES
Color
White
Appearance, immediately
Uniform emulsion
Appearance, 24 hours, RT
Clean separation
Emulsion
Extremely fine
Sp. gravity, @ 25.0C D1298 0.868-0.894
Density, lbs/gal @ 25.0C
7.22-7.42
Viscosity @ 25C, #4 Ford cup, sec.
10.7-14.2
Flash point, F, PMCC D93 142
pH
4.7-6.1
% Non Volatiles, 3 hrs. @ 110C
17.06-18.65
Wipe on/Wipe off
Easy
Gloss
High

Corrosion Tests

Fe rust, 48 hours, 25C None
Cu corrosion, 48 hours, 25C None

*For general information only. Not to be used as purchasing specifications.
**ASTM or modified ASTM methods.

ALL DATA, including suggestions and procedures discussed herein, are based on information we believe to be reliable and correct as of the date compiled. However, they should not be accepted as a guarantee or warranty to their accuracy, reliability or completeness. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. We do not accept liability for any loss or damage that may occur from the use of this information, nor do we offer any warranty against patent infringement.

Company Leadership Information

J. B. Chemical Co. Inc.
14803 S. Spring Street.
Gardena, CA. 90248 USA

Telephone: 310-532-3021
Toll free in the USA: 800-522-2468
Fax: 310-532-2810
E-mail: dave@kemopro.com
 or Contact us here

Company Websites: